229: Sunday 29th April 2012

I mounted the 2 circuit boards today. Before, they were just hanging on the cables resting on the rubber insulator, but needed fixing properly. I made up a 2 part bracket for the left and right sides of the circuit boards. This was basically 2 pieces of aluminium angle joined together to make a sort of squared U shape. In the photo you can see this going under the rubber insulator on the floor. The USB cable then runs off to the back of centre console.
At the back of the centre console is a convenient panel that is quite easy to just pull off, so I wound the cable up under there and it is now ready for a laptop to plug in.

No comments:

Post a Comment