Saturday my friend Sandy came round and helped me get the air receiver fitted for the air suspension system. The feet on the receiver almost exactly matched the rails they were going on to. I pulled out some 40mm L section mild steel and we made 2 brackets to fix to the rails. We then drilled holes in the sides of the brackets to bolt the receiver on and then offered it up to the rails to mark through the other holes. We then drilled the rails and fitted the tank to the car. Last job for Saturday was to paint the new brackets with smooth red Hammerite.
----
Sunday Morning I bolted the receiver tank. In the the photo below you can see it in the car nice and secure. Next job is to make a bracket to mount the compressor pump and valve block.
No comments:
Post a Comment