47: Monday 31st August 2009

Removed the tape from the starter loom and cut out the main starter cable. Re-routed looms together and taped them up. Traced wires for key 2 and key3 at cruise control module as this is the easiest place to access them. 3rd pin = key2. Couldn't find key3 so looked at the immobiliser loom and found a wire hanging out of the 'secret' key switch. I picked up the key3 12v from there and run a new cable through the engine compartment. I ran out of daylight so I called it a night.

No comments:

Post a Comment