I have fitted the centre console back in the car, but I cannot remember if the PAS switch was "on" when I took it out of the old panel. It does not matter as there are no markings to say which is on and off. I know that I set it up so when it is off, the switch is illuminated. This is not a problem now as I don't have a gear lever in the way any more. It all went back together with no real problems. The only change I had to make was to the wiring between the FWD/REV switch and the stop button as they were no longer right next to each other, so I had to make a longer wire between them. Not really a problem. The photo below shows the view from the Drivers door.----
The next photo below shows the view from the passenger side.
No comments:
Post a Comment